Features:

• Fulfils all requirements of relevant standards, ISO / EN 285, validation to ISO / EN 554, directive EEC 98/37 EEC 89/336 and EEC 73/23.
  
• Built-in alpha numerical matrix printer for lot documentation
  
• Modern control electronics (PLC) for the sterilising process, with a separate documentation. The entire electrical equipment complies with the EN 602004 / EN 60601
  
• Easy to operate with a colour touch screen operating panel
  
• High quality materials and surface finish
  - Chamber AISI 316L, glass bead-blasted
  - Doors AISI 316L
  - Jacket AISI 321
  - Sealing frame AISI 316L
  - Tubing AISI 316L
  
• Attractive Dimensions
  
• Lowest possible loading height
  
• Automatic switch off at night and restart in the morning
  
• High performance watering vacuum pump for a fast and low chamber evacuation
  
• Water circulation system with heat exchanger for the reutilization of water
  
• The chamber temperature is measured with a twin PT 1000 sensor. The sensors lead to the PLC control or to the printer interface. This makes an independent registration possible.
  
• Continuous pressure transducers are used to measure chamber pressure and jacket pressure.
  
• The silicon door seal is fitted in the milled precision slot ( max. tolerance 0.2mm), compressed air is applied to the seal (long lifetime is guaranteed)
  
• Smooth and PLC controlled chamber door/s. Movements take place trough an integrated electromotor.
  
• For the online and post documentation, there is an integrated interface for the Belimed IT system ICS 8535. (Option)
  
• Automatic controlled safety facilities ensure a high safety level, for the users while working: Chamber door (closing protection), door end positions, door seals, slip clutch on door drive motor, safety overpressure valves for chamber and jacket.