|
Package sealing device |
|
|
Sterilization in an autoclave is the safest way for prevention
of infections. After sterilization, however, care must be taken
that instruments are not contaminated again. The MELAseal®100
and MELAseal®101
Package Sealing Devices can effectively seal sterilized
instruments so that they are stored while being safely protected
against contamination. Without great physical effort, these two
models produce optimal sealing seams 10 mm wide, with precise
sealing pressure. The german standard DIN 58953 specifies
sealing seams at least 8 mm wide. The working table is now
integrated in the housing of the device.
|
|
|
|
|
|
|
The MELAseal®101
Package Sealing Device is always immediately ready for use,
without a heating-up period. When the user turns the crank, the
pressure bar is pressed against the sealing bar. This procedure
automatically starts the sealing process. The signal lamp shows
when the sealing is finished (after 2 ... 5 seconds). The
integrated cutter cuts off bags / wrappers to the required
length during the sealing procedure. These wrappings can be more
economically processed then finished plastic-film bags.
|
Technical data: |
(dimensions are for width
×
height
×
depth) |
|
MELAseal
®
101 |
41 x 22 x 15 cm |
|
With reel dispenser "standard" and MELAfol®
- rolls |
41 x 45 x
28 cm |
|
With reel dispenser "advanced" and MELAfol
®
- rolls |
41 x 27 x
41 cm |
|
230 Volt, 50 Hz, 510 W |
|
|
|
|
|
|