PRODUCTS >> Medicine >> X-ray
Multi-purpose C-Arm table
UNIX+






UNIX+ is an innovative multi-purpose C-Arm table designed for general R/F examinations, specialised applications, interventional radiology, vascular and non-vascular procedures (DSA)

UNIX+ combines the advantages of a fully digital radiology table with an X-Ray tube/image intensifier above and under the table-top (AP/PA) and an isocentric C-Arm for interventional radiology and angiography

The system has been designed for maximum uptime and patient workflow, thereby reducing overall operating costs. Its very convenient design provides maximum works area around the table, and requires minimum room space.

  • UNIX+ is an ideal system for diagnostic and interventional examination. The various projections possible without moving the patient means a reduction in examination time and increased field of application
  • +90 O /-90 O tilting
  • AP/PA projections for both table side and remote controlled applications
  • Long C-Arm longitudinal travel in order to offer full patient coverage (head to toe) without moving him
  • Wide range of clinical projections (RAO 90o , LAO 45 o , CRA 45 o , CAU 45 o )
  • Low table-top access ( 51 cm only)

Technical specifications:

C-Arm

 

Main Arm tilt

-90 O /+90 O

CRA/CAU

+/-45 O

LAO/RAO

-45 O /+90 O

C-Arm Longitudinal Movement

155 cm

C-Arm Vertical Movement

81 to 139 cm

Focus to image intensifier distance (SID)

104- 129 cm

Image intensifier position

(AP/PA)

Image intensifier vertical Movement

25 cm

Patient table-top (sidearm to the left or right)

 

Size of patient table (LxW)

220x56 cm

Type of the table

Carbon fibre, curved

Maximum patient load

162 kg

Inherent filtration

0.9 mm al eq.

Lateral movement

-13/+ 30 cm

Table-top cradle

+/-20 O

Patient table-top vertical movement

51 to 144 cm

Minimum height of the table-top (loading position)

51 cm

Preprogrammed positions

 

Possibility of memorizing references positions

Yes

Possibility of coming back automatically to the initial position

Yes

Simultaneous table-top C-Arm Movement

Yes

Memorizing of the centering and positions

Yes

Recommended configuration

 

MAGNUM HF Generator

100 kHz

X-Ray tube

9000 rpm

Image intensifier

40 cm ( 16” ) high-res.

High Definition CCD camera

1024x1024x12 bits

FLASH DSA Digital imaging system

1024x1024x12 bits

Installation requirements

 

Power supply

400 Vac +/-10% +N+G, 50/60 Hz, 80A

UNIX dimensions

 

Weight

1 300 kg

Steel base plate

90x45 cm

Type of floor required

Concrete. Approx. 1300 kg/m 2

Minimum room size

3.50 x 2.55 x 2.75 (H) m

Recommended room size

4 x 4 2.90 (H) m

Options

Dose area product meter (DAP)